SC1500 Series CompactPCI Single Board Computers
URL: http://www.sanritz.co.jp/products/cpci/sc1505-e.htm
SC1500 Serie sare single board CPU modules, uses AMD-K6 series Processor,
256Mbyte DRAM, SVGA and Ethernet, provides a high performance and a cost-effective unit for Telecommunication, Instrumentation and Factory Applications.
| Company Information |
Sanritz Automation: Sanritz Automation, a Toyota's embedded affiliate, is committed to manufacturing high quality CompactPCI and VME products under ISO9001.
|
SC1503/1504/1505 FEATURES
K6-2E/300-400MHz
100MHz Front Side Bus.
Low power consumption by using a highly effective DC/DC converter for the power circuit.
CPU cooler is unnecessary with an efficient, thin heat sink.
6U single slot size
Double slot with HD/FD.
Main memory up to 256Mbyte
100MHz operation Synchronous DRAM
Supports ECC function to correct error of 1bit automatically.
High reliability mezzanine module.
1MByte L2 cache
AGP 3D Graphic accelerator
S3 Trio3D with 4MB SGRAM.
Resolution up to 1600x1200 dot.
10Base-T/100Base-Tx Ethernet
USB (Universal Serial Bus) port
DiskOnChip Flash Disk module
Max 288MByte
Single slot diskless operation ready.
Supports DOS, Windows95, WindowsNT, Tornado, and Qnx and other.
Diagnostic function
WDT (Watch Dog Timer) interruption and LED display
Two stage CPU chip temperature monitoring.
Hot Swap Compatible
The peripheral boards can be attached or removed without turning off the system power.
Drives seven clocks and ENUM# is monitored.
PCI E-IDE interface and FDD interface
HDD/FDD is connected via the FILE Module
Optional SC7005 FILE module enhances the function.
3.5" floppy disk drive and 2.5" Enhanced-IDE hard drive are installed onboard.
3.5" FDD, HDD, and CD-ROM drive of the outside, etc. can be connected by the flat cable.
Equipped with SCSI-II, which can be connected from the front panel or the inside connector.
A variety of PMC modules on the market can be used by PMC (PCI Mezzanine Card) slot.
Easy access front panel I/O connectors
PS/2 style keyboard & mouse combined port.
Serial port 2ch (RS232C).
Parallel port 1ch, EPP/ECP support.
Rear Panel I/O
IDE/FDD signals and the front panel signals can be connected through J4/J5.
The transition module is prepared by the option.
Software support
Tornado BSP support
K6-IIIE+ Model, SC1521, will be available in 2001.
Supported Processors 
|
