16 Megabit (2Mb x 8-Bit),
CMOS 3.0 Volt-only Boot Sector Flash Memory

General Description
The Am29LV116D is a 16 Mbit, 3.0 Volt-only Flash. All read, program, and erase operations are accomplished using only a single power supply. The device can also be programmed in standard EPROM programmers. The standard device offers access times of 70, 90, and 120 ns, allowing high speed microprocessors to operate without wait states. The device is offered in a 40-pin TSOP package.

Distinctive Characteristics

Architectural Advantages

• Single power supply operation
• 2.7V to 3.6V read and write operations for battery-powered applications
• Manufactured on 0.32 µm process technology
• Compatible with and replaces Am29LV116B device
• Flexible sector architecture
• One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and thirty-one 64 Kbyte sectors
• Supports full chip erase
• Sector Protection features:
  - A hardware method of locking a sector to prevent any program or erase operations within that sector
  - Sectors can be locked in-system or via programming equipment
  - Temporary Sector Unprotect feature allows code changes in previously locked sectors
• Top or bottom boot block configurations available
• Compatible with JEDEC standards
• Pinout and software compatible with single power supply Flash
• Superior inadvertent write protection

• 40-pin TSOP

Performance Characteristics

• High performance
• Access times as fast as 70 ns
• Ultra low power consumption (typical values at 5 MHz)
• 200 nA Automatic Sleep mode current
• 200 nA standby mode current
• 9 mA read current
• 15 mA program/erase current
• Minimum 1,000,000 write cycle guarantee per sector
• 20-year data retention at 125°C
• Reliable operation for the life of the system

Software Features

• Unlock Bypass Mode Program Command
• Reduces overall programming time when issuing multiple program command sequences
• CFI (Common Flash Interface) compliant
• Provides device-specific information to the system, allowing host software to easily reconfigure for different Flash devices
• Data# Polling and Toggle Bits
• Provides a software method of detecting program or erase operation completion
• Erase Suspend/Erase Resume
• Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the erase operation

Hardware Features

• Ready/Busy# pin (RY/BY#)
• Provides a hardware method of detecting program or erase cycle completion
• Hardware reset pin (RESET#)
• Hardware method to reset the device to reading array data