MCP Features

• Power supply voltage of 2.7 to 3.3 volt
• High performance
• Access time as fast as 70 ns
• Operating Temperature
• 40?C to +85?C

Architectural Advantages

• Simultaneous Read/Write operations
• Data can be continuously read from one bank while executing erase/program functions in other bank
• Zero latency between read and write operations
• Secured Silicon (SecSi) Sector: Extra 256 Byte sector
• Factory locked and identifiable: 16 bytes available for secure, random factory Electronic Serial Number; verifiable as factory locked through autoselect function
• Customer lockable: Sector is one-time programmable. Once locked, data cannot be changed
• Zero Power Operation
• Sophisticated power management circuits reduce power consumed during inactive periods to nearly zero
• Top or bottom boot block
• Manufactured on 0.17 ?m process technology
• Compatible with JEDEC standards
• Pinout and software compatible with single-power-supply flash standard

• 73-Ball FBGA

Performance Characteristics

• High performance
• Access time as fast as 70 ns
• Program time: 4 ?s/word typical utilizing Accelerate function
• Ultra low power consumption (typical values)
• 2 mA active read current at 1 MHz
• 10 mA active read current at 5 MHz
• 200 nA in standby or automatic sleep mode
• Minimum 1 million write cycles guaranteed per sector
• 20 Year data retention at 125?C
• Reliable operation for the life of the system

Software Features

• Data Management Software (DMS)
• AMD-supplied software manages data programming and erasing, enabling EEPROM emulation
• Eases sector erase limitations
• Supports Common Flash Memory Interface (CFI)
• Erase Suspend/Erase Resume
• Suspends erase operations to allow programming in same bank
• Data# Polling and Toggle Bits
• Provides a software method of detecting the status of program or erase cycles
• Unlock Bypass Program command
• Reduces overall programming time when issuing multiple program command sequences

Hardware Features

• Any combination of sectors can be erased
• Ready/Busy# output (RY/BY#)
• Hardware method for detecting program or erase cycle completion
• Hardware reset pin (RESET#)
• Hardware method of resetting the internal state machine to reading array data
• WP#/ACC input pin
• Write protect (WP#) function allows protection of two outermost boot sectors, regardless of sector protect status
• Acceleration (ACC) function accelerates program timing
• Sector protection
• Hardware method of locking a sector, either in-system or using programming equipment, to prevent any program or erase operation within that sector
• Temporary Sector Unprotect allows changing data in protected sectors in-system

SRAM Features

• Power dissipation
• Operating: 22 mA maximum
• Standby: 10 ?A maximum
• CE1#s and CE2s Chip Select
• Power down features using CE1s# and CE2s
• Data retention supply voltage: 1.5 to 3.3 volt
• Byte data control: LB#s (DQ7?DQ0), UB#s (DQ15?DQ8)