 |
|
|
|
|
Am29LV081B Product Overview
8 Megabit (1 Mb x 8-Bit),
CMOS 3.0 Volt-only Uniform Sector Flash Memory
General Description
The Am29LV081B is an 8 Mbit, 3.0 Volt-only Glash. This device requires only a single, 3.0 Volt VCC supply to perform read, program, and erase operations. A standard EPROM programmer can also be used to program and erase the device. The device is offered in a 40-pin TSOP package.
Distinctive Characteristics
Architectural Advantages
- Single power supply operation
- 2.7V to 3.6V read and write operations for battery-powered applications
- Manufactured on 0.32 µm process technology
- Compatible with 0.5 µm Am29LV081 device
- Flexible sector architecture
- Sixteen 64 Kbyte sectors
- Supports full chip erase
- Sector Protection features:
- Hardware method of locking a sector to prevent any program or erase operations within that sector
- Sectors can be locked in-system or via programming equipment
- Temporary Sector Unprotect feature allows code changes in previously locked sectors
- Compatible with JEDEC standards
- Pinout and software compatible with single power supply Flash
- Superior inadvertent write protection
Return to Top
Package Options
Return to Top
Performance Characteristics
- High performance
- Access times as fast as 70 ns
- Ultra low power consumption (typical values at 5 MHz)
- 200 nA Automatic Sleep mode current
- 200 nA standby mode current
- 7 mA read current
- 15 mA program/erase current
- Minimum 1,000,000 write cycle guarantee per sector
- 20-year data retention at 125°C
- Reliable operation for the life of the system
Return to Top
Software Features
- Unlock Bypass Mode Program Command
- Reduces overall programming time when issuing multiple program command sequences
- Data# Polling and Toggle Bits
- Provides a software method of detecting program or erase operation completion
- Erase Suspend/Erase Resume
- Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the erase operation
- Command sequence optimized for mass storage
- Specific addresses not required for unlock cycles
Return to Top
Hardware Features
- Ready/Busy# pin (RY/BY#)
- Provides a hardware method of detecting program or erase cycle completion
- Hardware reset pin (RESET#)
- Hardware method to reset the device to reading array data
Return to Top
|
|
|
|
|
