ATI SB600 Series - Specifications
CPU Interface
- Supports the following Intel processors:
- Desktop: Pentium 4, Pentium D, Pentium Extreme Edition, Prescott, Celeron, Celeron D, Cedar Mill, Presler, Conroe, Allendale
- Mobile: Mobile Pentium 4, Pentium M, Mobile Prescott, Celeron M, Yonah, Yonah Celeron, Merom
- Supports the following AMD processors:
- Desktop: Athlon 64, Athlon 64 FX, Athlon 64 FX X2, Sempron, Opteron, dual-core- Opteron
- Mobile: Athlon XP-M, Mobile Athlon 64, Turion 64, Mobile Sempron
A-Link Xpress II interface to the Northbridge
- 1/2/4-lane A-Link Xpress II interface
- Dynamic detection of lane configuration
- High data transfer bandwidth
PCI Host Bus Controller
- Supports PCI rev. 2.3 specifications
- Supports PCI bus at 33 MHz
- Supports up to 6 master devices
- Supports 40-bit addressing
- Supports interrupt steering for plug-n-play devices
- Supports concurrent PCI operations
- Supports hiding of PCI devices by BIOS/hardware
- Supports spread spectrum
USB Controllers
- 5 OHCI and 1 EHCI Host controllers to support 10 USB ports
- All 10 ports are USB 1.1 (“Low Speed”, “Full Speed”) and 2.0 (“High Speed”) compatible
- Supports ACPI S1~S5
- Supports legacy keyboard/mouse
- Supports USB debug port
- Supports port disable with individual control
SMBus Controller
- SMBus Rev. 2.0 compliant
- Support SMBALERT # signal / GPIO
Interrupt Controller
- Supports IOAPIC/X-IO APIC mode for 24 channels of interrupts
- Supports 8259 legacy mode for 15 interrupts
- Supports programmable level/edge triggering on each channels
- Supports serial interrupt on quiet and continuous modes
DMA Controller
- Two cascaded 8237 DMA controllers
- Supports PC/PCI/DMA
- Supports LPC DMA
- Supports type F DMA
LPC host bus controller
- Supports LPC based super I/O and flash devices
- Supports two master/DMA devices
- Supports TPM version 1.1/1.2 devices for enhanced security
- Supports SPI devices
SATA II AHCI Controller
- Supports four SATA ports, complying with SATA 2.0 specifications
- Supports SATA II 3.0GHz PHY, with backward compatibility with 1.5GHz
- Supports RAID stripping (RAID 0) across all 4 ports
- Supports RAID mirroring (RAID 1) across all 4 ports
- Supports RAID 10 (4 ports needed)
- Supports both AHCI mode and IDE mode
- Supports advanced power management with AHCI mode
IDE Controller
- Single PATA channel support
- Support PIO, multi-word DMA, and Ultra DMA 33/66/100/133 modes
- 32x32 byte buffers on each channel for buffering
- Swap bay support by tri-state IDE signals
- Supports Messages Signaled Interrupt (MSI)
- Integrated IDE series resistors
AC Link interface
- Supports for both audio and modem Codecs
- Compliant with AC-97 codec Rev. 2.3
- 6/8 channel support on audio codec
- Multiple functions for audio and modem Codec operations
- Bus master logic
- Supports up to 3 codecs simultaneously
- Supports SDIF output
- Separate bus from the HD audio
HD Audio
- 4 independent output streams (DMA)
- 4 independent input streams (DMA)
- Up to 16 channels of audio output per stream
- Supports up to 4 codecs
- Up to 192kHz sample rate
- Up to 32-bit per sample
- Message Signaled Interrupt (MSI) capability
- 64-bit addressing capability for MSI
- 64-bit addressing capability for DMA bus master
- Unified Audio Architecture (UAA) compatible
- HD Audio registers can be located anywhere in the 64-bit address space
Timers
- 8254-compatible timer
- Microsoft High Precision Event Timer (HPET)
- ACPI power management timer
RTC (Real Time Clock)
- 256-byte battery backed CMOS RAM
- Hardware supported century rollover
- RTC battery monitoring feature
Power Management
- ACPI specification 3.0 compliant power management schemes
- Supports C2, C3, C4
- Supports C1e and C3 pop-up (AMD platform only)
- Supports S0, S1, S2, S3, S4, and S4
- Supports SpeedStep™
- Full support for On-Now™
- Supports CPU SMM, generating SMI# signal upon power management events
- GPIO supports on external wake up events
- Supports CLKRUN# on PCI power management
- Provides clock generator and CPU STPCLK# control
- Hardware monitoring support
- Support for ASF
Hardware Monitor
- Supports 3 Independent Fan Control outputs
- Supports 4 thermal diode temperature sensing functions
- Supports 1 AMDSI function
|
|
