- General Questions: What is AMD Link?
- General Questions: What are the minimum requirements for it?
- General Questions: Do I need an AMD Radeon™ graphics card in order to install AMD Link?
- General Questions: What version of Radeon™ Software do I need for the AMD Link app to work?
- General Questions: How do I report bugs when the app doesn’t behave as it should?
- User Interface: What are the six sections of AMD Link?
- User Interface: What is the bell I see in the top left of the Home section after I have connected to a PC?
- AMD Radeon™ ReLive: Can I select multiple images or videos in the ReLive gallery?
- AMD Radeon™ ReLive: When I record/stream, or take a screenshot, where are my files saved?
- AMD Radeon™ ReLive: Why can’t I use the app’s ReLive functions? I am already connected!
- Settings: What is the AMD User Experience Program and why do I see it in the settings?
- Settings: My screen is “always on” while I am in the app – can that be disabled?
- News Feed: Can I share news items that I find interesting?
- Performance Metrics: Can I customize the performance metrics lists?
- Performance Metrics: How does the Histogram view work?
- Performance Metrics: Why are there different colours in the FPS tab?
- General: How do I reconnect to my PC instead of Adding a PC all over again?
- General: Can I reconnect automatically to my last active profile when I start the app?
- General: Can two or more mobile devices connect to my PC?
- General: How do I disconnect from my PC when I am done?
- Network: How can I troubleshoot if a connection cannot be established?
- Network: I am getting an error message while trying to connect! What does it mean?
- Network: How can I find out my PC and my device’s IP address?
- Settings: How can I delete a profile that’s not valid anymore?
- Game streaming: I can’t see a Game Streaming tab! What am I doing wrong?
- Game streaming: What kind of wireless network do I need for optimal results?
- Game streaming: How can I check whether my current streaming settings are OK for my system?
- Game streaming: What does the “Turn Monitor Off” option do?
- Game streaming: How can I play games using an external controller?
- Game streaming: How can I add games to my Game Explorer list?
- Game streaming: Is streaming reserved just for games?
- Game streaming: How can I edit my on-screen controllers?
- Game streaming: How can I enable on-screen controls for my game?
- Game streaming: What do all these icons do when you swipe down from the top of the screen while streaming?
- Game streaming: My in-game controls are not working! Why is that?
- Game streaming: Can I customize my button mappings?
- Radeon™ Wattman Technology: Where can I find AMD Radeon™ Wattman technology1?
- Radeon™ Wattman Technology: I can’t see an AMD Radeon™ Wattman technology option! Why is that?
- Radeon™ Wattman Technology: I can see the values updating but I can’t change any settings.
- AMD Radeon™ Settings: I don’t see an “AMD Link” page in AMD Radeon™ Settings; what do I do?
- AMD Radeon™ Settings: How can I tell if a device is connected to my PC?
- AMD Radeon™ Settings: Can I delete a profile from AMD Radeon™ Settings?
- AMD Radeon™ Settings: What happens if my network IP changes or if I change the network parameters (like opening ports etc.)?
- What is the full list of AMD Link voice commands that are supported?
AMD Link is a ground-breaking app designed to enable users to stream games to mobile devices, monitor performance and PC system info, stream and share gameplay moments from a PC, and be in the know with AMD’s social/gaming feeds on a smartphone or tablet.
You need Android 5 or later, or iOS 10 or later to be able to run the app on a mobile device.
No, however, the functionality of the app will be severely limited as most of its sections, such as Game streaming, Performance Monitoring, AMD Radeon™ Wattman technology1 and AMD Radeon™ ReLive will not be available. The News Feed functionality doesn’t need a connection to your PC to work, for instance.
It depends on the functionality; features introduced in AMD Radeon™ Software Adrenalin Edition 2019, 18.12.1 or later will be needed. For minimum functionality can be obtained with Radeon™ Software 18.6.1 or later.
You can submit bugs and feature requests through our usual AMD Issue Reporting Form: http://www.amd.com/report
- The Home section, containing images you can click on to learn more about AMD or AMD partner products.
- Game streaming section, which allows you to launch PC games and play them in your device, customize your controllers or even stream your desktop.
- PC Performance Monitoring section, which allows the user to monitor and track gaming performance and system info of their PC using easy-to-understand bar graphs. This section also houses Radeon™ Wattman* functionality that allows the user to optimize their PC.
- AMD Radeon™ ReLive section that enables capturing or streaming of your gameplay and sharing the gameplay moments saved on your PC. The user can also view their AMD Radeon™ReLive gallery, with live previews of their screenshots/videos, crop them to a desired length and save them to their mobile device.
- The News Feed section allows users to receive info from AMD social feeds, as well as options to share them across their social channels.
- App Settings that allows users to connect to their saved connection profiles, initiate a new PC connection, select whether they want their device’s display to be always on or not and enable advanced AMD Radeon™ Wattman* functionality.
User Interface: What is the bell I see in the top left of the Home section after I have connected to a PC?
You can click on the bell to find out the latest versions of AMD Link and AMD Radeon™ Settings – and whether any updates have been released. If a new AMD Radeon™ Settings version is available, the user will be able to update their driver using an express upgrade.
The user can select multiple files to delete them – but can only select and share one image/video at a time.
In this case, AMD Radeon™ Settings is still doing the heavy-lifting – which means that once you record a video or take a screenshot, your files will reside in your ReLive gallery’s save folder on your PC.
You need to make sure you have installed and enabled AMD Radeon™ ReLive in Radeon™ Settings. Once installed, go to the ReLive tab in Radeon Settings, and make sure ReLive is on.
This entry appears if you have opted in to share information about your PC with AMD in order to help us improve our products and services. For more information about the program, head here: http://www.amd.com/en/corporate/amd-user-experience.
Of course; just go to App settings and click on the “Keep Screen On” checkbox to disable this feature.
Yes, click on the news item. On the top right you will see a sharing button. By clicking that, you’ll be able to share this news item to your social media and more, depending on what your device supports.
In the Current Performance and Timeline tabs, you can click on the “Select Metrics” button (top, second button from the right) to add or remove metrics.
In the Histogram tab, you can click on the metric for which you want to show a full screen view. Apart from the average value of the metric, you can also click on the histogram to see values at any point in time. The history duration and sampling interval can be modified by clicking on the Options icon (top right).
The colours have the following significance: Green, if the game is achieving 60fps or more, Yellow if it is between 30 and 60fps, and Red if it is below the 30fps threshold.
Reconnecting to your already existing profile is easy: juts click on the name of the profile once you get to the “Welcome” screen, and you will connect right away. You still have the option to go to the settings afterwards and connect to a different profile.
Of course; just enable “Automatic reconnection” from the Settings tab.
No, the connection between your PC and your mobile device must be one-to-one. If you try to connect another mobile device while a prior connection is still active, the existing connection will be terminated, and the new device will be connected.
You can go to the App Settings section and tap on your PC profile to uncheck and disconnect. Or, you can simply close the app.
First, if you cannot connect by using the QR code, there is a manual option – so select “Manual Input” from the Add a PC wizard in the beginning, or via the Settings and follow the instructions on your device’s screen. Apart from that, make sure you have checked the following:
- You have a strong Wi-Fi signal on your device.
- You are connected to the same network and subnet as your PC.
- In manual input, that you are entering the correct IP address on your PC, it may have more than one. Your Hostname (name of your PC) also needs to be typed exactly as shown.
- Some software firewalls and routers may interfere with the AMD Link app’s ability to communicate with your PC. So, make sure port 58888 is open for business.
- It has been noted that the combination of poor mobile device cameras and overly reflective monitors doesn’t allow the QR code to be properly focused by the camera. Make sure you minimise on-screen reflections to make it work and move the camera approximately 40-50cm away from the monitor.
- Make sure you click on the “Auto-configure Windows Firewall” button in the AMD Link tab – this will create the necessary Firewall entries for you.
Here are some of the error messages you may encounter while trying to connect AMD Link to your PC and their meaning.
Deadline expired before operation could complete. This usually means that your PC didn’t respond to AMD Link’s request for connection. Please make sure your firewall, antivirus or router are not blocking connections.
Couldn’t create an entity (e.g., file or directory) because it already exists. Delete your profile both in Radeon™ Settings and in the AMD Link app, and try to re-initiate the connection from the beginning.
The caller does not have permission to execute the specified operation. Blocked RPC communications or blocked ports are usually to blame for this, so check your firewalls and/or anti-virus software.
The request does not have valid authentication credentials for the operation. This means that one of the following connection details is not right:
The user disconnected from the server – that may happen when you have a weak or finicky Wi-Fi signal, you locked your PC or your phone went into deep sleep and thus the connection was terminated.
The service is currently unavailable. Make sure AMD Link server is enabled and running and that all the network configuration details check out.
Invalid QR Code
Same as UNAUTHENTICATED
Same as UNAVAILABLE
Connection timed out
Same as DEADLINE_EXCEEDED
Same as CANCELLED
In your Radeon™ Settings, click on the “AMD Link” button. If “AMD Link Server” is disabled, enable it. If “AMD Link Server” is enabled, click “Add Device”. Click on the “Manual Input” button – you will see your IP there. If there is more than one IP, click on the “Server IP” button to see the whole list.
In order to find the IP of your mobile device, the steps are different and they depend on the operating system version, and your device’s manufacturer. Here are a few tips:
- If you have an iOS device, go to Settings and click on Wi-Fi. Then click on the connected Wi-Fi network and you’ll see your network information there.
- On Android it depends on your device, Android version and device manufacturer – usually you can try going to Settings, Connections, click on Wi-Fi and then click on the connected network. Alternatively, there will be an advanced option on your Wi-Fi network list that will take you to a window with all the relevant information.
Your saved connection profile can become invalid for several reasons; most commonly the IP of either your PC or your device has changed at some point. In that case, you can go to the app Settings section, and swipe right the profile from left to right. You will have a few seconds to undo your action, if you did this by mistake but after that, the profile will be deleted.
In order to have Game streaming working, you need the following:
- AMD Link 2.0 or later
- AMD Radeon™ Settings Adrenalin Edition 2019 (18.50) or later
- In AMD Radeon™ Settings, Radeon™ ReLive needs to be installed and enabled. Record Desktop also needs to be enabled. In the Game and VR Streaming tab, Remote Play needs to be enabled.
To get the very best gaming experience, you will need a fast Wi Fi network, such as 802.11ac or later. Older networks may also work, but you will have to make compromises on stream quality.
When you go to the Game Explorer and click on the three-dot menu, the last option is called “Test Stream”. That will give you an indication whether your current settings are enough for a good streaming experience.
When you’re streaming your game or your desktop, your mobile device displays whatever your monitor does. Sometimes you may want to turn off your monitor and just have the mobile device displaying your game, especially if you decide to play your game away from your PC. Using our patent-pending technology, AMD Link allows you to turn off your displays and save on power without that having any effect on your game. Please note that this is a setting that cannot be changed while you are streaming.
All you need to do is connect your Bluetooth controller (such as an XBox One Controller, etc) to your mobile device as you normally do. AMD Link will recognise it and allow it to control your games. On iOS, you will need an MFI-certified controller to be able to connect it to your device.
AMD Link communicates with the Gaming tab in Radeon™ Settings in order to get a list of your PC games. In order to add new games or remove them, you need to go to Radeon™ Settings > Gaming tab and edit your games list by either scanning for new games, adding a game manually or removing a game you no longer have installed.
Of course not; you can start streaming your desktop using the “Start Streaming” button on the top right. This allows you to control your desktop from afar, but also do some very interesting things like watch a movie, or even do some work if you have the appropriate peripherals connected to your mobile device.
From the Game streaming tab, choose the “Control” icon to get to the appropriate sub-page. There, you can see all the custom controller profiles you have, allowing you to edit them, add new ones or delete some if you no longer need them.
The default control mode is Trackpad; in order to enable the on-screen controls for your game, swipe down from the centre of the screen, and click on the “Controls” icon (second from the right) – when you de-select the “Trackpad” option, you will be able to choose either the default on-screen controls or the ones you’ve customized to your preference.
Game streaming: What do all these icons do when you swipe down from the top of the screen while streaming?
From left to right:
- Left Arrow icon takes you back to AMD Link without interrupting your stream. You can come back to your game by tapping on the “Now Streaming” bar.
- he keyboard icon allows you to use your Android/iOS keyboard to input text.
- he monitor icon appears when you have more than one monitor attached to your PC – it allows you to stream them one by one.
- The Window icon allows you to focus your stream on the active window. This means that you can have a game running in Windowed mode, and when you focus on that, the game will be full screen on your device
- The controls icon allows you to choose the controller you want to use. You can use trackpad mode, or the appropriate custom on-screen controls you have created. If you have an external Bluetooth controller connected, it will work either way.
- The three-dot menu allows you to change the streaming settings without interrupting your stream. You are also able to send specific keystrokes (like Alt-F4) to your PC.
Some games handle controls differently than others – AMD Link hooks onto your system but some games unfortunately do not like that. Another example is, there are games out there that if you haven’t enabled your external controller before launching your game, your controller won’t work. These sorts of games will stream properly, but the controls won’t work because AMD Link’s hooks take place after the game starts.
Yes you can, but only on Android. On iOS, if a controller is MFI certified it will automatically work so that customization is not necessary.
Radeon™ Wattman technology resides in the Performance tab
In order to use Radeon™ Wattman technology in AMD Link, Radeon™ Wattman needs to be supported by your graphics card and you need a compatible AMD Radeon™ Settings version installed (Adrenaline 2019 version or later).
You need to enable “Wattman Advanced Control” from the Settings tab in order to be able to change settings.
If you don’t see the AMD Link option in AMD Radeon™ Settings, it means that you don’t have the full Radeon™ Settings version installed. Go to https://www.amd.com/support to download and install the latest version for your system.
Click on the “AMD Link” button and look at the saved profiles; if a device is connected, the indicator beside it will be green.
You can simply click on the profile that you want and select “Remove.”
AMD Radeon™ Settings: What happens if my network IP changes or if I change the network parameters (like opening ports etc.)?
All you need to do is restart the AMD Link server to get the new network information. To do that, just switch the “AMD Link Server” to off, and on again.
AMD Link supports two languages, English and Chinese. Here is a table with the supported commands.
Overclocking AMD processors, including without limitation, altering clock frequencies / multipliers or memory timing / voltage, to operate beyond their stock specifications will void any applicable AMD product warranty, even when such overclocking is enabled via AMD hardware and/or software. This may also void warranties offered by the system manufacturer or retailer. Users assume all risks and liabilities that may arise out of overclocking AMD processors, including, without limitation, failure of or damage to hardware, reduced system performance and/or data loss, corruption or vulnerability. GD-106
The information contained herein is for informational purposes only, and is subject to change without notice. While every precaution has been taken in the preparation of this document, it may contain technical inaccuracies, omissions and typographical errors, and AMD is under no obligation to update or otherwise correct this information. Advanced Micro Devices, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this document, and assumes no liability of any kind, including the implied warranties of noninfringement, merchantability or fitness for particular purposes, with respect to the operation or use of AMD hardware, software or other products described herein. No license, including implied or arising by estoppel, to any intellectual property rights is granted by this document. Terms and limitations applicable to the purchase or use of AMD’s products are as set forth in a signed agreement between the parties or in AMD's Standard Terms and Conditions of Sale. GD-18
© 2018 Advanced Micro Devices, Inc. All rights reserved. AMD, the AMD Arrow logo, Radeon, and combinations thereof are trademarks of Advanced Micro Devices, Inc. DirectX is a registered trademark of Microsoft Corporation in the US and other jurisdictions. OpenCL is a trademark of Apple Inc. used by permission by Khronos. OpenGL is a registered trademark of Silicon Graphics, Inc. used by permission by Khronos. Vulkan and the Vulkan logo are registered trademarks of Khronos Group, Inc. Other product names used in this publication are for identification purposes only and may be trademarks of their respective companies.