Adaptive SoCs & FPGA Design Tools Downloads - 2025.1

Vivado 2025.1.1 supports the following devices:

• Versal™ Prime Series Gen 2: XC2VM3558 with new SSVA1440 package, Speed Grades -1LHP, -1LP, -1MP, -2LHP, -2LLHI, -2LLI, -2LP, -2MP
• Versal™ AI Edge Series Gen 2: XC2VE3504, XC2VE3558 with new SSVA1440 package, Speed Grades -1LHP, -1LP, -1LXHP, -1LXP, -1MP, -2LHP, -2LLHI, -2LLI, -2LP, -2MP, -2MYP

The Unified Web Installer reduces download time and saves significant disk space. It can also be used to create an SFD (Single File Download) image that can be used later for installation on systems without internet connection. See how to do this with a quick-take video available here.

Note:

• Vivado ML 2021.1 and later versions require upgrading your license server tools to the Flex 11.17.2.0 versions.

Vivado™ Lab Edition is a compact, and standalone product targeted for use in the lab environments. It provides for programming and logic/serial IO debug of all Vivado supported devices. Lab Edition requires no certificate or activation license key.
Vivado Hardware Server enables Vivado Design tools to communicate with a remote target system.

Vivado™ Lab Edition is a compact, and standalone product targeted for use in the lab environments. It provides for programming and logic/serial IO debug of all Vivado supported devices. Lab Edition requires no certificate or activation license key.
Vivado Hardware Server enables Vivado Design tools to communicate with a remote target system.

Vivado™ ML 2021.1 and later versions require upgrading your license server tools to the Flex 11.17.2.0 versions.

The Vitis™ Embedded Development is a standalone embedded software development package for creating, building, debugging, optimizing, and downloading software applications for AMD FPGA processors. It includes a new Vitis IDE  with its new backend Vitis Server, as well as the classic command line utilities such as hw_server, bootgen and program_flash.

Note: This release supports Versal™, Zynq™ MPSoC, Zynq 7000 and MicroBlaze™.

The Vitis™ Embedded Development is a standalone embedded software development package for creating, building, debugging, optimizing, and downloading software applications for AMD FPGA processors. It includes a new Vitis IDE  with its new backend Vitis Server, as well as the classic command line utilities such as hw_server, bootgen and program_flash.

Note: This release supports Versal™, Zynq™ MPSoC, Zynq 7000 and MicroBlaze™.

Deprecation Notice: Support for ZCU102, ZCU102 DFX, and ZCU104 base platforms will end in upcoming releases. For details and migration guidance, refer to the Deprecation Notification Answer Record.

The following base platforms are added to Vitis Installer. You can use them directly after installing Vitis.

• xilinx_vck190_base_202510_1
• xilinx_vck190_base_dfx_202510_1 
• xilinx_vmk180_base_202510_1 
• xilinx_vek280_base_202510_1     
• xilinx_zcu104_base_202510_1
• xilinx_kv260_base_202510_1

Embedded platform source files and build instructions can be found at AMD GitHub.  See Vitis Embedded Platform installation guide and user guide for additional information.

The ‘common image’ packages below contain a prebuilt Linux kernel and root file system that can be used with any Zynq™, Zynq MP or Versal™ Zynq board for embedded Vitis™ platform developers. These files need to be copied to an SD flash card along with the platform specific boot image (boot.bin). Also included is the ‘sysroot’ required for embedded Vitis platform application development.  The sdk.sh script must to be used to setup the compressed Yocto Project SDK on a Linux development host properly.

Note: PetaLinux Tools installation is not necessary to use the common images.  The licenses and sources used to create the common image content is provided below.