Initiator/Target for PCI™/PCI-X Cores
Full access to this IP core, including bitstream generation capability, requires that you generate and install a Full License Key.
Requirements
Please refer to the Requirements link on the product page for this core for information on:
- Software and system requirements
- Licensing terms and conditions for evaluation
License Terms
This core is licensed under the following terms: Core License Agreement.
Ordering Information
To purchase a LogiCORE™ IP core, contact your local Sales Representative referencing the part number found on the product page.
| LogiCORE Product Name |
Part Number |
64-bit Initiator/Target 133 MHz for PCI-X,
64-bit Initiator/Target 33 MHz for PCI™, &
32-bit and 64-bit Initiator/Target for PCI *** |
EF-DI-PCIX64-VE-SITE *** |
| 64-bit Initiator/Target 133 MHz for PCI-X |
EF-DI-PCIX-V5-SITE |
| 32-bit and 64-bit Initiator/Target for PCI *** |
EF-DI-PCI-AL-SITE *** |
| 64-bit Initiator/Target for PCI |
EF-DI-PCI64-IP-SITE |
| 32-bit Initiator/Target for PCI *** |
EF-DI-PCI32-IP-SITE ***
EF-DI-PCI32-SP-PROJ |
| *** For EDK customers, The OPB to PCI32 Bridge and PLBv4.6 to PCI32 Bridge cores are included with these products. |
Product Offerings
| LogiCORE IP Product Bundles for PCI and PCI-X |
64-bit
Initiator/
Target for PCI-X
Virtex™ FPGAs
|
64-bit Initiator/
Target for PCI
Kintex™, Artix™, Zynq™ *, Virtex ** & Spartan *** FPGAs
|
32-bit Initiator/
Target for PCI
Kintex, Artix, Zynq *, Virtex ** & Spartan *** FPGAs |
OPB / PLB to PCI32 Bridge
|
PLBv4.6 to PCI32 Full Bridge
|
|---|
64-bit Initiator/Target
133 MHz for PCI-X
EF-DI-PCIX-V5-SITE |
X
|
|
|
|
|
64-bit Initiator/Target 133 MHz for PCI-X &
64-bit Initiator/Target 33 MHz for PCI &
32-bit and 64-bit Initiator/Target for PCI
EF-DI-PCIX64-VE-SITE |
X
|
X
|
X
|
X
|
X
|
32-bit and 64-bit Initiator/Target for PCI
EF-DI-PCI-AL-SITE |
|
X
|
X
|
X
|
X
|
64-bit Initiator/Target for PCI
EF-DI-PCI64-IP-SITE |
|
X
|
|
|
|
32-bit Initiator/Target for PCI
EF-DI-PCI32-IP-SITE
EF-DI-PCI32-SP-PROJ |
|
|
X
|
X
|
X
|
* Initiator/Target for PCI Kintex, Artix, Zynq supports Kintex 7, Artix 7, Zynq 7000. Virtex 5, Virtex 4, Virtex II Pro, Virtex II, Virtex E, Virtex, and all Spartan devices.
** Initiator/Target for PCI Virtex supports Virtex 5, Virtex 4, Virtex II Pro, Virtex II, Virtex E, Virtex, and all Spartan devices.
*** Initiator/Target for PCI Spartan supports Spartan 6, Spartan 3A, Spartan 3E, Spartan 3, Spartan IIE, Spartan II devices. |
Generate and Install a Full License Key
After purchasing a license for this core, follow the instructions in the purchase confirmation email you will receive on downloading the IP core netlist from the Licensing Site, and on generating and installing a Full license key to activate Full access to the core.
Release Notes & Known Issues
For information on New Features, Known Issues, and Patches please refer to the Installation, Licensing and release Notes document available on the Licensing Solution Center.
