Article Number

Installing the AMDGPU-PRO Driver

There are three simple steps involved in the installation of the AMDGPU-Pro Driver: Download, Extract, and Install.  The instructions to perform the installation are intended for a Red Hat 7/CentOS 7 or Red Hat 6/CentOS 6 installation and should take less than 10 minutes to complete.  Before installing the driver, a quick note on how to check if your system already has AMDGPU-PRO installed.   In addition, the recommended best practice is to bring the system up-to-date before starting the driver installation, with:

sudo yum update

sudo reboot

System Check

The easiest way to find out if you have AMDGPU-Pro already installed on your Red Hat or CentOS System is via an RPM query.  Using the following command at a terminal will provide you with the version of the AMDGPU-Pro stack on your system, or if providing no output, informs you that there are no packages found:

rpm -qa | grep amdgpu-pro


A direct link to download the Linux AMDGPU-Pro driver is given below and it is also available on the Driver Download Page. This file has a "tar.xz" extension which reflects a more-effective compression algorithm that (in most cases) creates a smaller archive than the more common gzip format.

​NOTE: This file can also be located via the Driver Download Page by locating your card and selecting the Linux Driver link.


After the archive is downloaded, extract the contents to a temporary location from which you can install it. The example below assumes you have downloaded the archive to /tmp and will extract to the same location. If your file was downloaded into the ~/Downloads/ folder by default, you can also extract and install from there, and afterwards you can remove the install files.

(Notes: Please replace the "NNNNNN" in the following command line with the actual build number of the downloaded file.)

cd /tmp

tar -Jxvf amdgpu-pro-17.30-NNNNNN.tar.xz


The AMDGPU-Pro driver requires access to specific RPMs from Red Hat or CentOS installation media as well as Extra Packages for Enterprise Linux (EPEL) for purposes of dependency resolution.  A script named will confirm that all required prerequisite files and repositories are available in order to successfully install the AMDGPU-Pro driver in the Red Hat or CentOS environment.  It can be run as follows:

sh –-check

This will check if the required repositories are available to ensure a smooth installation. If there are any warnings, the script can be executed again without any options to build the necessary repositories


Note that an internet connection will be required if EPEL is not found and Red Hat or CentOS installation media from a DVD, USB key or a mounted ISO will be required if the system does not have an active Red Hat or CentOS Subscription.

Once the archive is expanded on the local machine and the amdgpu-pro-preinstall script has successfully confirmed all prerequisites, run the extracted script (amdgpu-pro-install) to install the graphics stack. 

(Notes: Please replace the "NNNNNN" in the following command line with the actual build number of the downloaded file.)

cd amdgpu-pro-17.30-NNNNNN

./amdgpu-pro-install –y

sudo reboot


Uninstalling the AMD GPU-PRO Driver 

If for any reason you wish to remove the AMDGPU-PRO graphics stack you can do this using the uninstallation script which was part of the installation and is present in your path. From the command prompt enter the following command:


Installing the Optional ROCm Component with Red Hat 7.3 or CentOS 7.3

This AMDGPU-Pro driver package incorporates the ROCm component that can be optionally installed for running Compute/OpenCL applications.  You can install the component by issuing the following command:

sudo yum install -y rocm-amdgpu-pro


Configuring the Optional ROCm Component with Red Hat 7.3 or CentOS 7.3

The LLVM_BIN environment variable needs to be set prior to running ROCm applications.

To set it temporarily when running an individual ROCm command, such as clinfo, use:

env LLVM_BIN=/opt/amdgpu-pro/bin /opt/amdgpu-pro/bin/clinfo

To set it permanently for all bash and other sh-like shell users, you can use the following command:

echo 'export LLVM_BIN=/opt/amdgpu-pro/bin' | sudo tee /etc/profile.d/

See the Ubuntu Environment Variables Community Help for more information.

To set it permanently for all csh users, you can use the following command:

echo 'setenv LLVM_BIN /opt/amdgpu-pro/bin' | sudo tee /etc/profile.d/amdgpu-pro.csh

© 2017 Advanced Micro Devices, Inc.  The information contained herein is for informational purposes only and is subject to change without notice. While every precaution has been taken in the preparation of this document, it may contain technical inaccuracies, omissions and typographical errors, and AMD is under no obligation to update or otherwise correct this information. Advanced Micro Devices, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and assumes no liability of any kind, including the implied warranties of non-infringement, merchantability or fitness for particular purposes, with respect to the operation or use of AMD hardware, software or other products described herein. No license, including implied or arising by estoppel, to any intellectual property rights is granted by this document. This notice does not change the terms and limitations applicable to the purchase or use of AMD's products that may be set forth in a separate signed agreement between you and AMD.

AMD, the AMD Arrow logo, AMD Radeon, AMD FirePro and combinations thereof are trademarks of Advanced Micro Devices, Inc.

Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.

Vulkan and the Vulkan logo are registered trademarks of the Khronos Group Inc.

OpenCL and the OpenCL logo are trademarks of Apple Inc. used by permission by Khronos.