This article provides information on how to install Radeon™ ReLive software. The content of this article is organized into the following sections:
Radeon ReLive is currently supported on systems with AMD Graphics Core Next (GCN) Architecture-based Desktop Graphics. These include:
- Radeon™ RX Vega Series
- Radeon™ RX 500 Series
- Radeon™ RX 400 Series
- Radeon™ Pro Duo Graphics
- AMD Radeon™ R9 Fury, R9 300, R7 300 Series
- AMD Radeon™ R9 200, R7 200, R5 300, R5 240 Series
- AMD Radeon™ HD 8500 – HD 8900 Series
- AMD Radeon™ HD 7700 – HD 7900 Serie
Note! Radeon ReLive for AMD Radeon products is supported on the following Operating Systems:
- AMD Radeon™ RX Vega, 500 Series Graphics products and newer are only supported on Windows® 7 and Windows® 10 64-bit.
- AMD Radeon™ R9 Fury, Radeon™ Pro Duo and Radeon™ RX 400 Series Graphics products are only supported on Windows 7, Windows® 8.1 and Windows 10 64-bit.
All remaining products are supported under Windows 7, Windows 8.1 and Windows 10 32bit and 64bit versions.
Radeon ReLive is currently supported on DirectX® 9, 10 11, 12 and Vulkan® APIs.
The availability of specific Radeon ReLive recording functions will depend on the GPU being used. For more information on encoding support, please visit Radeon ReLive.
Radeon ReLive was first introduced with Radeon™ Software Crimson ReLive Edition 16.12.1 and further enhanced in the latest Radeon™ Software Adrenalin Edition.
To download and install the latest Radeon Software Adrenalin Edition driver please visit AMD Drivers + Download Center. For information on how to install Radeon Software, please refer to KB: How to Install Radeon Software on a Windows® Based System
At the end of the Radeon Software package installation, the following screen will appear for supported products as described in the section above.
Select Install Radeon ReLive to install Radeon ReLive. Restart the system once the installation is complete.
To use Radeon ReLive, it must first be enabled. This can be done in Radeon™ Settings which can be access by right-clicking on the Desktop and select AMD Radeon Settings.
In Radeon Settings select the ReLive tab.
Enable ReLive by toggling the button to "On".
Once enabled, Radeon ReLive provides many customizable settings for hotkeys, recording, streaming, and overlay, all of which can be accessed from within the feature's designated tab.